|
 |
| |
|
| |
|
This tower has 2 legs on ground and 2 legs on the roof top. The total height of tower above ground is 30 meters. Height above roof top is 18 meters. The base of the tower is rectangular according to the grid of the existing building. The rectangular base has been converted to square base at top. The top platform is an octogonal platform, 5.2 M corner to corner. |
|
| |
This tower was made out of solid rods at the top, which gives it a slim appearance. Antennas, which are mounted on this tower, required a space diversity of 4 meters.
|
|
|
| |
|
In this case square base was constructed to suit the grid available on the roof-top. After one meter height, the tower was made triangular tower resting on a square base.
|
|
| |
In this tower, all the braces are welded to legs. This makes the tower very fast to erect. This tower is suitable for light loads. Hot Dip Galvanizing is done after welding the braces.
|
|
|
| |
|
Top Y platform can be oriented in any direction to provide 3 sectors with 120 degree diversity.
|
|
| |
3 parallel towers are placed at column tops on terrace. The distance between column top provides the desired space diversity between antennas 3 parallel towers are placed at column tops on terrace. The distance between column top provides the desired space diversity between antennas 3 parallel towers are placed at column tops on terrace. The distance between column top provides the desired space diversity between antennas 3 parallel towers are placed at column tops on terrace. The distance between column top provides the desired space diversity between antennas.
|
|
|
| |
